Foolproof Tips For Preparing Your Walls Before Applying Wallpaper
Fresh wallpaper looks crisp and polished when the wall underneath sits smooth, clean, and dry. A little preparation before installation helps prevent bumps, peeling edges, and uneven seams. Start by checking the wall surface, fixing small flaws, and removing dust or old residue.
Here are a few steps that can give your wallpaper Dubai a firm surface and help it stay attractive for longer.
Inspect the wall surface
Start by checking the entire wall under good lighting. Look for cracks, holes, dents, loose paint, grease marks, and rough patches. Run your hand across the surface to spot areas that look fine but still feel uneven. Mark problem spots with a pencil so you can fix them before installation.
Remove old wallpaper
Old wallpaper can interfere with fresh adhesive. Peel away loose sections and scrape off leftover backing. Use warm water or a suitable wallpaper removal solution for stubborn areas. Work gently around the wall so you do not damage the surface underneath.
Repair cracks and holes
Fill small holes and cracks with wall filler. Apply the filler with a putty knife and spread it evenly across each damaged spot. Let it dry fully, then sand the area until it sits level with the rest of the wall. Check the surface again by hand before moving on.
Sand rough areas
Sanding helps smooth raised marks, dried filler, and small bumps. Use fine-grit sandpaper and work across repaired sections with gentle pressure. Avoid aggressive sanding, especially on plasterboard or delicate surfaces. Wipe away the resulting dust with a clean, dry cloth.
Clean away dirt and grease
Clean walls help wallpaper adhesive grip properly. Dust the surface first, then wipe it with a slightly damp cloth. For greasy areas, use a mild cleaning solution that suits the wall finish. Allow the wall to dry completely before applying primer or adhesive.
Apply the right primer
Primer gives the wall a more even surface and helps control moisture absorption. Choose a primer suited to your wall type and wallpaper material. Apply a thin, even coat and allow it to dry according to the product instructions. A properly primed wall also makes future wallpaper removal easier.
Check the wall before installation
Give the prepared wall one final inspection. Look for remaining dust, damp areas, rough patches, or visible cracks. Fix any small issue before you start hanging the wallpaper. Keep the room at a comfortable temperature and avoid installing wallpaper on a damp wall.